Proposal of a new indicator to define ductility applied to corroded steel reinforcement on concrete structures
DOI:
https://doi.org/10.20868/ade.2015.3102Keywords:
Estructuras de hormigón, corrosión, ductilidad, acero equivalente, Concrete structures, reinforcement corrosion, ductility, equivalent steel.Abstract
The carbonation of concrete or the chlorides ingress in such quantity to reach the level of bars is triggers of reinforcement corrosion. One of the most significant effects of reinforcing steel corrosion on reinforced concrete structures is the decline in the ductility-related properties of the steel. Reinforcement ductility has a decisive effect on the overall ductility of reinforced concrete structures. Different Codes classify the type of steel depending on their ductility defined by the minimum values of several parameters. Using indicators of ductility associating different properties can be advantageous on many occasions. It is considered necessary to define the ductility by means of a single parameter that considers strength values and deformation simultaneously. There are a number of criteria for defining steel ductility by a single parameter. The present experimental study addresses the variation in the ductility of concrete-embedded steel bars when exposed to accelerated corrosion. This paper analyzes the suitability of a new indicator of ductility used in corroded bars.
Downloads
References
Almusallam, A.A. (2001). Effect of degree of corrosion on the properties of reinforcing steel bars, Construction and Building Materials, 15, 361-368. doi. http://dx.doi.org/10.1016/S0950-0618(01)00009-5
Apostolopoulos, C. A., Papadopoulos, M. P. & Pantelakis, S. (2006). Tensile behavior of corroded reinforcing steel bars BSt 500s, Construction and building materials, 20, 782-789. doi. http://dx.doi.org/10.1016/j.conbuildmat.2005.01.065
Cobo, A. & León, J. (1997). Ductilidad seccional de estructuras de hormigón armado cuando se tienen en cuenta el confinamiento y el sobrearmado. Anales de Ingeniería Mecánica, Revista de la Asociación Española de Ingeniería Mecánica, 2, 97-106.
Código Modelo CEB-FIP 1990 para hormigón estructural. (1993). Comité Euro-Internacional del Hormigón y federación Internacional de pretensado. CEB Boletín de información 213/214.
Cosenza, E., Greco, C. & Manfredi, G. (1998). An Equivalent steel Index in the Assessment of ductility Performances of the Reinforcement, CEB Boletín, 242.
Creazza, G. & Russo, S. (1998). A new proposal for defining the ductility of concrete reinforcement steels by means of a single parameter, CEB Boletín 242.
Doñate, A. (2003). Cálculo práctico de estructuras de hormigón con redistribución limitada de esfuerzos. Calidad Siderúrgica S.R.L. Madrid.
Eurocódigo EC-2 -UNE-EN 1992-1-1:2013 (2013). Proyecto de estructuras de hormigón. Parte 1-1: Reglas generales y reglas para edificación. AENOR.
García, M. D., Alonso, M.C., Andrade, M.C. & Rodríguez, J. (1998). Influencia de la corrosión en las propiedades mecánicas del acero. Hormigón y Acero, 210, 11-21.
Instrucción del Hormigón Estructural EHE-08 (2009). Ministerio de Fomento. Comisión permanente del Hormigón. 2ª Edición.
Moreno, E. (2008). Corrosión de armaduras en estructuras de hormigón: Estudio experimental de la variación de la ductilidad en armaduras corroídas aplicando el criterio de acero equivalente. (Tesis Doctoral). Universidad Carlos III de Madrid.
Maslehuddin, M., Al- Zahrani, M. M., Al-Dulaijan, S.U., Abdulquddus, Rehman, S. & Ahsan, S.N. (2002). Effect of steel manufacturing process and atmospheric corrosion on the corrosion resistance of steel bars in concrete. Cement and Concrete Composites, 24,151-158. http://dx.doi.org/10.1016/S0958-9465(01)00035-X
Ortega, H. (1998). Estudio Experimental de la influencia del tipo de acero en la capacidad de redistribución en losas de Hormigón Armado. (Tesis doctoral). ETS de Ingenieros de Caminos, Canales y Puertos, UPM, Madrid.
Palsson, R.; Mirza, M.S. (2002). Mechanical response of corroded steel reinforcement of abandoned concrete bridge, ACI Structural Journal, 99 (2), 157-162.
Torres, A. A.; Martínez-Madrid, A. A.; Muñoz-Noval A. (2003). Capacidad remanente en vigas de hormigón que presentan corrosión localizada en el acero de refuerzo. Materiales de Construcción, 53 (271-272).doi. http://dx.doi.org/10.3989/mc.2003.v53.i271-272.297
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Autor / BY-NC
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Anales de Edificación does not charge authors for processing or publishing an article and provides immediate Open Access to its content. All content is available free of charge to the user or his institution. Users are permitted to read, download, copy, distribute, print, search or link to the full text of articles, or use them for any other lawful purpose, without prior permission from the publisher or author. This is in accordance with the BOAI definition of open access.
- Authors retain the copyright and grant to the journal the right to a Creative Commons attribution / Non-Commercial / Non-Derivative 4.0 International (CC BY NC ND) License that allows others to share the work with an acknowledgement of authorship and non-commercial use.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, placing it in an institutional repository or publishing it in a book).
Unless otherwise indicated, all contents of the electronic edition are distributed under a Creative Commons license.
