Comportamiento mecánico del hormigón con áridos reciclados de hormigón

Autores/as

  • Gissell Gamboa-Espinoza Departamento de Tecnología de la Edificación. E.T.S. de Edificación. Universidad Politécnica de Madrid https://orcid.org/0000-0002-4932-9101
  • Daniela Jalón-Villagrán Departamento de Tecnología de la Edificación. E.T.S. de Edificación. Universidad Politécnica de Madrid
  • Katherina Olarra-Putilina Departamento de Tecnología de la Edificación. E.T.S. de Edificación. Universidad Politécnica de Madrid
  • Maria Isabel Prieto-Barrio Departamento de Tecnología de la Edificación. E.T.S. de Edificación. Universidad Politécnica de Madrid https://orcid.org/0000-0003-2797-3964

DOI:

https://doi.org/10.20868/ade.2025.5565

Palabras clave:

agregado reciclado, resistencia a la compresión, resistencia a la flexión, modulo de elasticidad, hormigón

Resumen

Este trabajo evalúa el comportamiento mecánico del hormigón con áridos reciclados de concreto (RCA), considerando resistencia a compresión, resistencia a flexión y módulo de elasticidad a 28 días. La investigación se desarrolló mediante una revisión sistemática siguiendo la metodología PRISMA, seleccionando cuatro estudios con objetivos y metodologías consistentes. Se tabularon y compararon propiedades mecánicas clave, complementando el análisis con representaciones gráficas para evaluar la influencia de proporciones y tratamientos de RCA. Entre los resultados, la mezcla RCA-0.45-50-4 (MMA) alcanzó 50.58 MPa de resistencia a
compresión, 4.90 MPa de resistencia a flexión y 35.98 GPa de módulo de elasticidad con un 50% de RCA. La mezcla CC-R50, tratada con recubrimiento de pasta reciclada y carbonatación acelerada, mostró un desempeño balanceado, con módulo superior al de la mezcla de control y resistencia a compresión próxima. Se concluye que técnicas como la carbonatación acelerada y el uso de fibras de acero mitigan la pérdida de propiedades, consolidando el potencial estructural y sostenible del RCA.

Descargas

Los datos de descarga aún no están disponibles.

Referencias

1. Abdo, A. ;, El-Zohairy, A. ;, Alashker, Y. ;, Badran, M. A. E. ;, Alvarez, I., Abdo, A., El-Zohairy, A., Alashker, Y., Abd, M., Badran, E.-A., & Ahmed, S. (2024). Effect of Treated/Untreated Recycled Aggregate Concrete: Structural Behavior of RC Beams. Sustainability 2024, Vol. 16, Page 4039, 16(10), 4039. https://doi.org/10.3390/SU16104039

2. Benli, A., Bayraktar, O. Y., Koksal, F., & Kaplan, G. (2024). Sustainable use of recycled fine aggregates in steel fibre-reinforced concrete: Fresh, flexural, mechanical and durability characteristics. Journal of Building Engineering, 97, 110745. https://doi.org/10.1016/J.JOBE.2024.110745

3. Choi, H. B., Park, J. O., Kim, T. H., & Lee, K. R. (2021). Mechanical properties of basalt-based recycled aggregate concrete for jeju island. Materials, 14(18). https://doi.org/10.3390/ma14185429

4. Haigh, R., Sandanayake, M., Joseph, P., Arun, M., Yaghoubi, E., Vrcelj, Z., & Sasi, S. (2024). The Thermo-Phase Change Reactivity of Textile and Cardboard Fibres in Varied Concrete Composites. Sustainability 2024, Vol. 16, Page 3221, 16(8), 3221. https://doi.org/10.3390/SU16083221

5. Jagan, S., Neelakantan, T. R., & Saravanakumar, P. (2021). Mechanical properties of recycled aggregate concrete treated by variation in mixing approaches. Revista de La Construccion, 20(2), 236–248. https://doi.org/10.7764/RDLC.20.2.35

6. Letelier, V., Hott, F., Bustamante, M., & Wenzel, B. (2024). Effect of recycled coarse aggregate treated with recycled binder paste coating and accelerated carbonation on mechanical and physical properties of concrete. Journal of Building Engineering, 82, 108311. https://doi.org/10.1016/J.JOBE.2023.108311

7. Oikonomopoulou, K., Ioannou, S., Savva, P., Spanou, M., Nicolaides, D., & Petrou, M. F. (2022). Effect of Mechanically Treated Recycled Aggregates on the Long Term Mechanical Properties and Durability of Concrete. Materials 2022, Vol. 15, Page 2871, 15(8), 2871. https://doi.org/10.3390/MA15082871

8. Pani, L., Francesconi, L., Rombi, J., Mistretta, F., Sassu, M., & Stochino, F. (2020). Effect of Parent Concrete on the Performance of Recycled Aggregate Concrete. Sustainability 2020, Vol. 12, Page 9399, 12(22), 9399. https://doi.org/10.3390/SU12229399

9. Pavlů, T., Fořtová, K., Mariaková, D., Řepka, J., Vlach, T., & Hájek, P. (2023). High-performance concrete with fine recycled concrete aggregate: Experimental assessment. Structural Concrete, 24(2), 1868–1878. https://doi.org/10.1002/SUCO.202200734;REQUESTEDJOURNAL:JOURNAL:17517648;WGROUP:STRING:PUBLICATION

10. Piccinali, A., Diotti, A., Plizzari, G., & Sorlini, S. (2022). Impact of Recycled Aggregate on the Mechanical and Environmental Properties of Concrete: A Review. Materials 2022, Vol. 15, Page 1818, 15(5), 1818. https://doi.org/10.3390/MA15051818

11. Revilla-Cuesta, V., Ortega-López, V., Faleschini, F., Espinosa, A. B., & Serrano-López, R. (2022). Hammer 39 rebound index as an overall-mechanical-quality indicator of self-compacting concrete containing recycled concrete aggregate. Construction and Building Materials, 347, 128549. https://doi.org/10.1016/J.CONBUILDMAT.2022.128549

12. Sun, L., Chen, X., Zhang, Y., Zhang, C., Li, Y., & Wang, C. (2024). Mechanical properties and hydration mechanism of low carbon concrete with recycled aggregate. Journal of Building Engineering, 94, 109981. https://doi.org/10.1016/J.JOBE.2024.109981

13. Wang, X., LI, F., & Yu, H. (2024). Effect of Biological shells aggregate on the Mechanical properties and sustainability of concrete. https://doi.org/10.21203/RS.3.RS-4093653/V1

14. Wang, Y., & Chen, Y. (2016). Modeling and calculation of solar gains through multi-glazing facades with specular reflection of venetian blind. Solar Energy, 130, 33–45. https://doi.org/10.1016/j.solener.2016.01.055

15. Zhang, H., Xiao, J., Tang, Y., Duan, Z., & Poon, C. sun. (2022). Long-term shrinkage and mechanical properties of fully recycled aggregate concrete: Testing and modelling. Cement and Concrete Composites, 130, 104527. https://doi.org/10.1016/J.CEMCONCOMP.2022.104527

Descargas

Publicado

2025-08-31

Número

Sección

Artículos

Cómo citar

Gamboa-Espinoza, G., Jalón-Villagrán, D., Olarra-Putilina, K., & Prieto-Barrio, M. I. (2025). Comportamiento mecánico del hormigón con áridos reciclados de hormigón. Anales De Edificación, 11(2), 29-39. https://doi.org/10.20868/ade.2025.5565