Production of designer jewelry using a high temperaturemicrowave heating technique
DOI:
https://doi.org/10.20868/ardin.2026.15.5659Abstract
This research implements an innovative technique through the artistic production of three- dimensional pieces that require the use of high temperatures. Specifically, it investigates how to use microwave technology to expand the accessibility and autonomy of this type of creative processes and, in turn, to do so while contributing to the goals set out in the 2030 agenda. The methodology used has been based on a procedure for testing ceramic and cast prototypes, in order to design microwave heating suitable for different geometries and volumes. This is due to the fact that the mentioned parameters are determinant in the production efficiency. Once the research tests have been completed, the results show that this energetic implementation constitutes an efficient, autonomous and low environmental impact procedure. In addition, it is confirmed that the designed technique offers high performance with product quality and electrical savings, which places the proposal as a tool with high employability within the field of plastic arts.
Downloads
References
1. Andrade X. (2015). Para una etnografía de ciertos objetos: la joyería contemporánea. Ecuador Debate, 95:33-48.
2. Arreola, J. J. Narrativa completa. México: Alfaguara, 1997. p 80-98.
3. Bargueño, E. (2024) Diseño de joyas de oro y plata en la dinastía Ming (1368-1644), Madrid. ArDin.
4. Berger, J: “¿Por qué miramos a los animales?” Mirar, Barcelona, Ed. Gustavo Gili, 2001, p. 375-376.
5. Cabral Almeida, A. (2014). La joyería contemporánea como arte. un estudio filosófico. UAB Universidad autónoma de Barcelona.
6. Canales, J y Domingo, C.: “La presencia del imaginario natural en la pintura urbana contemporánea” Universidad Politécnica de Valencia, 2019, p. 26-29.
7. Chander Prakash, Sunpreet Singh, Seeram Ramakrishna, and Linda Yongling Wu (2021) Sustainable Manufacturing Technologies: Additive, Subtractive, and Hybrid Series Editors.
8. Dorfles, G.: “Naturaleza y artificio”, Kumen, Barcelona, 1972, p. 15.
9. Horikoshi, S., Osawa, A., Sakmoto, S., & Serpone, N. (2013). Control of microwave generated hot spots. Part IV: Control of hot spots on a heterogeneous microwave absorbing catalyst surface by a hybrid internal/external heating method, Chemical Engineering and Processing, 73, 52–56.
10. Leiser, K. S. and Clark, D. E. (2011) Theory and application in materials processing”. Ceram. Trans., Microwaves. Westville, E. A. Lewis, Am. Ceram. Soc.
11. Jaschinski,B.: "Dark Five Points”. A Journal of Literature and Art, vol. 12, no. 1, Gale Academic Spring 2008, pp.73
12. Juan Tortosa, M. (2020). La joyería como lenguaje plástico. Una propuesta artística trazada a través del objeto joya y su relación con el cuerpo y el espacio [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/149396
13. Malamud, R. (2003) South Atlantic Review, Autumn, Vol. 68, No. 4 (Autumn), pp. 113- 116.
14. Martínez, R.B. (2015) Development of advanced ceramic materials with high performance through unconventional techniques" (Polytechnic University of Valencia.
15. Menezes, R.R; Souto, P.M, and. Kiminami, G. A. "Sintering of Ceramics - New Emerging Techniques" (IntechOpen, 2012) p. 626
16. Moreno, F. (2022) Reseñas de tesis: Procesado térmico de moldes para joyería y escultura de pequeño formato mediante tecnología microondas. Universidad de La Laguna.
17. Muñoz Mesa, L. & Sánchez Trujillo, J. (2016) El impacto de la impresión 3D en la joyería Lámpsakos, núm. 16, 2016, Julio-diciembre, Universidad Católica Luis Amigó. pp. 89-97 DOI: https://doi.org/10.21501/21454086.196
18. Plaza González, P.J (2015) Control De La Temperatura En Sistemas De Calentamiento Por Microondas Tesis Doctoral.
19. Prieto Villanueva. J. Á, (2017) La lucha por el reconocimiento de los oficios artísticos y la escuela Massana de Barcelona. El caso de los esmaltes, la cerámica y la joyería". Universitat de Barcelona.
20. Pignotti Ramaccini, C. (2016) Joyería Contemporánea, un nuevo fenómeno artístico. Análisis de las relaciones entre la joyería europea y mexicana en la actualidad [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/75945
21. Ramírez, C.C., Tobon, J.I. and Garcia, C.P. (2012) Latin American Journal of Metallurgy and Materials, 33[2] 316-322.
22. Yelin J. (2010) Escribir animales sobre las pequeñas prosas zoológicas de juan José Arreola y Joao Guimarães Rosa. Revista Escrita, Brasil. 11. P. 1-6.
Downloads
Published
Issue
Section
License
ArDIn does not charge authors for processing or publishing an article and provides immediate Open Access to its content. All content is available free to the user or their institution. Users are permitted to read, download, copy, distribute, print, search or link to the full text of articles, or use them for any other lawful purpose, without prior permission from the publisher or author. This is in accordance with the BOAI definition of open access.
- Authors retain the copyright and grant to the journal the right to a Creative Commons attribution / Non-Commercial / Non-Derivative 4.0 International (CC BY NC ND) License that allows others to share the work with an acknowledgement of authorship and non-commercial use.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, placing it in an institutional repository or publishing it in a book).
Unless otherwise indicated, all contents of the electronic edition are distributed under a Creative Commons license.
