Imagen de portada

Review of health and safety management based on BIM methodology = Revisión de la gestión de seguridad y salud basada en la metodología BIM

Antonio J. Aguilar, Maria L. de la Hoz, Maria D. Martínez Aires, Diego P. Ruíz


DOI: https://doi.org/10.20868/bma.2019.2.3919

Texto completo:

PDF

Resumen


Construction sector in particular requires a great attention due to its level of hazard associated to its special characteristics. In this regard it must also be remembered that unlike most industrial processes, the Architecture, Engineering and Construction (AEC) industry continues using traditional methods both in the design and execution of projects. In the specific case of safety management, these methods are based on the use of 2D plans/drawings to identify potential risks and establish preventive measures. These are manual working methods, usually based on the expertise of professionals. Recently, building Information Modelling (BIM) has emerged as a fundamental part of construction project management, where BIM is intended to replace the traditional methodology based on CAD. Several characteristics make the use of BIM appealing in safety management. On the one hand, the possibility of implementing BIM in construction projects provides the opportunity to control it from the beginning, applying prevention through design; this possibility has unleashed a growing interest in the application of BIM in construction safety and health management. In this context, this paper presents the results of the analysis and review of research in safety management applying BIM methodology. The methodology used to carry out this study is based on a systematic literature review. The analysis was carried out taking into account the following attributes: (1) year of publication, (2) country, (3) research topic and (4) applied technology. As a result of this study, we conclude that up to now BIM related research was mainly focused on the design and construction phase. An important aspect which is frequently studied is the implementation of new technologies throughout the construction process, for example, the use of algorithms, rule checking, real time location system combined with BIM methodology.

Resumen

El sector de la construcción es uno de los más peligrosos en el mundo, debido principalmente a las características especiales que presenta. Sin embargo, a diferencia de la industria, en el sector de la Ingeniería, Arquitectura y Construcción (IAC) se siguen empleando métodos tradicionales en el diseño y ejecución de los proyectos. En el caso específico de la gestión de la seguridad, estos métodos están basados en documentos y planos en 2D para identificar los riesgos y establecer las medidas preventivas. Estos métodos son manuales y basados normalmente en la experiencia del profesional. El Building Information Modelling (BIM) ha emergido como una herramienta fundamental en el sector de IAC, donde el BIM está llamado a reemplazar la metodología tradicional basada en CAD. La aplicación del BIM en proyectos de construcción aporta la ventaja de poder controlar el proyecto desde su inicio, pudiendo aplicar la prevención desde el diseño, mejorando así la gestión de la seguridad en este sector. El objetivo de la presente investigación es realizar una revisión del estado del conocimiento de la metodología BIM y la seguridad en obras de construcción. Con este fin, se han analizado las publicaciones anuales realizadas sobre este tema, en función de variables como título, año de publicación, tecnología, país de procedencia y caso de estudio. El análisis pone de manifiesto que las investigaciones están centradas principalmente en fase de diseño y construcción. Un aspecto importante es el empleo e implementación de nuevas tecnologías a lo largo del proceso constructivo, como es el uso de algoritmos, reglas de chequeo y sistemas de posicionamiento a tiempo real implementados en BIM.


Palabras clave


Building Information Modelling; Safety management; Construction; Review; Building Information Modelling; Gestión seguridad; Construcción; Revisión

Referencias


EUROSTAT, "Accidents at work statistics," Luxembourg: Office for Official Publication of the European Communities, 2018.

J. A. Gambatese, J. W. Hinze, and C. T. Haas, "Tool to design for construction worker safety," J. Arch. Eng., vol. 3, no. 1, pp. 32-41, 1997.

A. López-Arquillos, J. C. Rubio-Romero, and M. D. Martinez-Aires, "Prevention through Design (PtD). The importance of the concept in Engineering and Architecture university courses," Saf. Sci., vol. 73, pp. 8-14, 2015.Doi:https://doi.org/10.1016/j.ssci.2014.11.006

P. Lorent, "From drawing board to building site: Working conditions, quality and economic performance," Office of Official Publications of the European Community, Luxembourg, 1991.

A. López Valcárcel, "Panorama internacional de la seguridad y salud en el trabajo de construcción," El Criterio de la OIT [En línea]. Disponible en Internet< URL: http://training. itcilo. it/actrav_cdrom2/es/osh/cinte/main. htm>.[Citado en10 de mayo del 2013].

COM(2008) 698 final.6.11.2008. Relativa a la aplicación práctica de las Directivas 92/57/CEE (obras de construcción temporales o móviles) y 92/58/CEE (señalización de seguridad en el trabajo) en materia de salud y seguridad en el trabajo, Bruselas: 2008.

R. T. Szymberski, "Construction project safety planning," Tappi journal (USA), pp. 0734-1415, 1997.

D. Bryde, M. Broquetas, and J. M. Volm, "The project benefits of building information modelling (BIM)," Int. j. proj. manag., vol. 31, no. 7, pp. 971-980, 2013.Doi:https://doi.org/10.1016/j.ijproman.2012.12.001

C. M. Eastman, C. Eastman, P. Teicholz, and R. Sacks, BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors. John Wiley & Sons, 2011.

S. Zhang, J. Teizer, J.-K. Lee, C. M. Eastman, and M. Venugopal, "Building information modeling (BIM) and safety: Automatic safety checking of construction models and schedules," Autom. Constr., vol. 29, pp. 183-195, 2013.Doi:https://doi.org/10.1016/j.autcon.2012.05.006

F. Rodrigues and A. Alves, "Contribution of BIM for hazards’ prevention through design," Occupational Safety and Hygiene III, pp. 67-69, 2015.

K. Ku and T. Mills, "Research needs for building information modeling for construction safety," in International Proceedings of Associated Schools of Construction 45nd Annual Conference, Boston, 2010.

McGraw-Hill Construction, "The Business Value of BIM For Construction in Major Global Markets: how contractors around the world are driving innovation with building information modeling," Smart MarketReport, 2014.

A. K. D. Wong, F. K. Wong, and A. Nadeem, "Comparative roles of major stakeholders for the implementation of BIM in various countries," in Proceedings of the International Conference on Changing Roles: New Roles, New Challenges, Noordwijk Aan Zee, The Netherlands, 2009, pp. 5-9.

R. Sacks, O. Rozenfeld, and Y. Rosenfeld, "Spatial and temporal exposure to safety hazards in construction," J. Constr. Eng. Manage., vol. 135, no. 8, pp. 726-736, 2009.Doi:https://doi.org/10.1061/(ASCE)0733-9364(2009)135:8(726)

V. Benjaoran and S. Bhokha, "An integrated safety management with construction management using 4D CAD model," Saf. Sci., vol. 48, no. 3, pp. 395-403, 2010.Doi:https://doi.org/10.1016/j.ssci.2009.09.009

K. Kim, Y. Cho, and S. Zhang, "Integrating work sequences and temporary structures into safety planning: Automated scaffolding-related safety hazard identification and prevention in BIM," Autom. Constr., vol. 70, pp. 128-142, 2016.Doi:https://doi.org/10.1016/j.autcon.2016.06.012

Y. Zhou, L. Y. Ding, and L. J. Chen, "Application of 4D visualization technology for safety management in metro construction," Autom. Constr., vol. 34, pp. 25-36, 2013.Doi:https://doi.org/10.1016/j.autcon.2012.10.011

B. Choi, H.-S. Lee, M. Park, Y. K. Cho, and H. Kim, "Framework for work-space planning using four-dimensional BIM in construction projects," J. Constr. Eng. Manage., vol. 140, no. 9, pp. 04014041, 2014.Doi:https://doi.org/10.1061/(ASCE)CO.1943-7862.0000885

H. Kim, H.-S. Lee, M. Park, B. Chung, and S. Hwang, "Automated hazardous area identification using laborers' actual and optimal routes," Autom. Constr., vol. 65, pp. 21-32, 2016.Doi:https://doi.org/10.1016/j.autcon.2016.01.006

O. Golovina, J. Teizer, and N. Pradhananga, "Heat map generation for predictive safety planning: Preventing struck-by and near miss interactions between workers-on-foot and construction equipment," Autom. Constr., vol. 71, pp. 99-115, 2016.Doi:https://doi.org/10.1016/j.autcon.2016.03.008

S. Zhang, K. Sulankivi, M. Kiviniemi, I. Romo, C. M. Eastman, and J. Teizer, "BIM-based fall hazard identification and prevention in construction safety planning," Saf. Sci., vol. 72, pp. 31-45, 2015.Doi:https://doi.org/10.1016/j.ssci.2014.08.001

A. Albert, M. R. Hallowell, B. Kleiner, A. Chen, and M. Golparvar-Fard, "Enhancing construction hazard recognition with high-fidelity augmented virtuality," J. Civ. Eng. Manag., vol. 140, no. 7, Doi:https://doi.org/10.1061/(ASCE)CO.1943-7862.0000860

H. Li, G. Chan, and M. Skitmore, "Visualizing safety assessment by integrating the use of game technology," Autom. constr., vol. 22, pp. 498-505, 2012.Doi:https://doi.org/10.1016/j.autcon.2011.11.009

H. Li, M. Lu, G. Chan, and M. Skitmore, "Proactive training system for safe and efficient precast installation," Autom. Constr., vol. 49, pp. 163-174, 2015.Doi:https://doi.org/10.1016/j.autcon.2014.10.010

A. Perlman, R. Sacks, and R. Barak, "Hazard recognition and risk perception in construction," Saf. sci., vol. 64, pp. 22-31, 2014.Doi:https://doi.org/10.1016/j.ssci.2013.11.019

S. Zhang, F. Boukamp, and J. Teizer, "Ontology-based semantic modeling of construction safety knowledge: Towards automated safety planning for job hazard analysis (JHA)," Autom. Constr., vol. 52, pp. 29-41, 2015.Doi:https://doi.org/10.1016/j.autcon.2015.02.005

L. Y. Ding, B. T. Zhong, S. Wu, and H. B. Luo, "Construction risk knowledge management in BIM using ontology and semantic web technology," Saf. Sci., vol. 87, pp. 202-213, 2016.Doi:https://doi.org/10.1016/j.ssci.2016.04.008

H. Kim, H.-S. Lee, M. Park, B. Chung, and S. Hwang, "Information retrieval framework for hazard identification in construction," J. Comput. Civil. Eng., vol. 29, no. 3, pp. 04014052, 2013.Doi:https://doi.org/10.1061/(ASCE)CP.1943-5487.0000340

H. Moon, N. Dawood, and L. Kang, "Development of workspace conflict visualization system using 4D object of work schedule," Adv. Eng. Inform., vol. 28, no. 1, pp. 50-65, 2014.Doi:https://doi.org/10.1016/j.aei.2013.12.001

H. L. Guo, H. Li, and V. Li, "VP-based safety management in large-scale construction projects: A conceptual framework," Autom. Constr., vol. 34, pp. 16-24, 2013.Doi:https://doi.org/10.1016/j.autcon.2012.10.013

T. Cheng and J. Teizer, "Real-time resource location data collection and visualization technology for construction safety and activity monitoring applications," Autom. Constr., vol. 34, pp. 3-15, 2013.Doi:https://doi.org/10.1016/j.autcon.2012.10.017

S. Zhang, J. Teizer, N. Pradhananga, and C. M. Eastman, "Workforce location tracking to model, visualize and analyze workspace requirements in building information models for construction safety planning," Autom. Constr., vol. 60, pp. 74-86, 2015.Doi:https://doi.org/10.1016/j.autcon.2015.09.009

S.-H. Wang, W.-C. Wang, K.-C. Wang, and S.-Y. Shih, "Applying building information modeling to support fire safety management," Autom. Constr., vol. 59, pp. 158-167, 2015.Doi:https://doi.org/10.1016/j.autcon.2015.02.001

P. Abolghasemzadeh, "A comprehensive method for environmentally sensitive and behavioral microscopic egress analysis in case of fire in buildings," Saf. sci., vol. 59, pp. 1-9, 2013.Doi:https://doi.org/10.1016/j.ssci.2013.04.008

N. Li, B. Becerik-Gerber, B. Krishnamachari, and L. Soibelman, "A BIM centered indoor localization algorithm to support building fire emergency response operations," Autom. Constr., vol. 42, pp. 78-89, 2014.Doi:https://doi.org/10.1016/j.autcon.2014.02.019

U. Rüppel and K. Schatz, "Designing a BIM-based serious game for fire safety evacuation simulations," Adv. Eng. Inform., vol. 25, no. 4, pp. 600-611, 2011.Doi:https://doi.org/10.1016/j.aei.2011.08.001


Enlaces refback

  • No hay ningún enlace refback.


Copyright (c) 2019 Autor / BY-NC-ND

Licencia de Creative Commons
Este obra está bajo una licencia de Creative Commons Reconocimiento-NoComercial-SinObraDerivada 4.0 Internacional.